Leica iCON Dual iCG60 GPS GNSS 60 Base Rover Kit

$8500

Sale Leica iCON Dual iCG60 GPS GNSS 60 Base Rover Kit with Panasonic Toughpad CC80 with iCON Software, completed serviced and calibrated by Leica authorized

Leica iCON Dual iCG60 GPS GNSS 60 Base Rover Kit description

Sale Leica iCON Dual iCG60 GPS GNSS 60 Base Rover Kit with Panasonic Toughpad CC80 with iCON Software, all gears have been completed serviced and calibrated by Leica authorized, ready to works to survey with Leica working standards

Leica iCON Dual iCG60 GPS GNSS 60 Base Rover Kit;

1X Leica iCON GPS 60 Smart Antenna Base Receiver
Leica CCD7 Internal Rx/Tx Radio UHF 403-473 MHz
1X Leica iCON GPS 60 Performance PLUS Smart Antenna Rover Receiver
Leica CCD7 Internal Rx/Tx Radio UHF 403-473 MHz
2X Leica GKL311 Single Bay Chargers
1X Leica CGA60 Antenna
1X Base Extension Rod
2X Leica GAT2 Gainflex Radio Antennas
2X Leica Lithium-Ion GEB222 Batteries
2X Leica GAD108 Extension Arms
2X Leica Transport Cases
New Seco Fixed Tripod
New Seco Adjustable Bipod
New Seco Snap-Loc Rover Rod

Panasonic Toughpad Rugged CC80 7” Tablet

Leica iCON Site Software Latest Version
Site Plus Module Enabled
Windows 8.1 Pro Operating System
1X Leica CMB10 7” Tablet Holder
1X Leica GHT63 Pole Clamp
2X Panasonic Extended Rechargeable Battery Packs
1X Tablet Wall Charger

Leica iCON gps 60 – Smart Antenna for Construction | Versatile construction antenna for Precise positioning

The Leica iCON gps 60 GNSS Smart Antenna, in combination with Leica iCON field solution, is the perfect tool for positioning tasks on construction site. Featuring superior GNSS technology and integrated communication options, it enables you to carry out reliable positioning tasks on-site much faster. The iCON gps 60 Smart Antenna delivers unmatched precision and performance in a rugged, compact unit. It is designed to stand up to the challenging conditions typically found on construction sites.

An integrated display provides full status information of the system, simplifying operation and configuration. The exceptional network capability of the iCON gps 60 allows you to work with SmartNet and other RTK networks aimed at high-accuracy GPS positioning.

Leica iCON gps 60 – designed for challenging conditions

All-purpose GNSS solution: Stream corrections over the internet without radio and easily and quickly perform many positioning tasks yourself. Check grade or cut & fill, stakeout points and lines, and as built checks. Save time and increase productivity by monitoring the grade from your supervisor vehicle on site.

Flexibility on site: With the iCON gps 60, you can also benefit from using it as a flexible entry level GNSS smart antenna for machine control applications. It can be mounted inside a construction machine and used for off machine applications. Integrated radio, modem and Bluetooth® provide flexible communication options for corrections tailored to all sites and regions – simply swap equipment between base and rover as required.

Maximum accuracy and reliability: Superior GNSS technology provides maximum accuracy and reliability, featuring:

SmartTrack+
SmartCheck+
xRTK

Leica iCON gps 60 features:

Flexibility that allows multiple use cases; rover, base station and on-machine for machine guidance applications
Integrated high-speed 4G modem provides excellent network performance
No controller required for base station set-up, meaning you need less hardware
Stream corrections over the internet using NTRIP technology enables all construction rovers and machines to connect an iCON gps 60 base station without radio, removing radio coverage limitations and reducing the initial hardware investment
Unique flexible software licensing and feature upgrade concept - you invest in what you need

GNSS PERFORMANCE
GNSS technology	Leica patented SmartTrack+ technology: • Advanced measurement engine • Jamming resistant measurements • High precision pulse aperture multipath correlator for pseudorange measurements • Minimum acquisition time
Number of channels	555 channels
Maximum simultaneous tracked satellites	Up to 60 satellites simultaneously on two frequencies
Satellite signals tracking	• GPS: L1, L2, L2C, L5 • GLONASS: L1, L2 • Galileo (Test): GIOVE-A, GIOVE-B • Galileo: E1, E5a, E5b, Alt-BOC • BeiDou B1, B2
GNSS measurements	Fully independent code and phase measurements of all frequencies: • GPS: carrier phase full wave length, Code (C/A, P, C Code) • GLONASS: carrier phase full wave length, Code (C/A, P narrow Code) • Galileo: carrier phase full wave length, Code • BeiDou: carrier phase full wave length, Code
Reacquisition time	< 1 sec
GNSS ANTENNA
GNSS antenna options	• Fully integrated GNSS antenna • External GNSS antenna connector (Type TNC)
External GNSS antenna options	• CGA60: GPS L1/L2/L5, GLONASS L1/L2, Galileo E1, E5a, E5b, Alt-BOC, BeiDou B1, B2
MEASUREMENT PERFORMANCE & ACCURACY
Accuracy (rms) with real-time (RTK)	Single baseline (< 30km): Horizontal: 8 mm + 1 ppm (rms), Vertical: 15 mm + 1 ppm (rms)
Accuracy (rms) with post processing	Static (phase) with long observations: Horizontal: 3 mm + 0.5 ppm (rms), Vertical: 3.5 mm + 0.5 ppm (rms) Static and rapid static (phase): Horizontal: 3 mm + 1 ppm (rms), Vertical: 5 mm + 1 ppm (rms)
On-the-fly (OTF) initialisation	RTK technology: Leica SmartCheck+ technology Reliability of OTF initialisation: Better than 99,99% Time for initalisation: Typically 4 sec
Network RTK	Network technology: Leica SmartRTK technology Supported RTK network solutions: iMAX, VRS, FKP Supported RTK network standards: MAC (Master Auxiliary Concept) approved by RTCM SC 104
HARDWARE
Weight & Dimensions	Weight (iCG60): 1450 g (3.19 lb) Weight: 3200g (7,05 lb) Standard RTK Network Rover, incl. iCG60, CC80 Controller with Bracket, Pole, Battery Dimensions: 197 mm x 197 mm x 130 mm (7,76 in x 7,76 in x 5,12 in)
Environmental specifications	Operating temperature: –40°C to +60°C (–40°F to +140 °F) Storage temperature: –40°C to +85°C (–40°F to +185°F) Humidity: 100%, compliance with ISO9022-12-04 and MIL STD 810F – 507.4-I Proof against: water, sand and dust: IP67 according IEC60529 and MIL STD 810F – 506.4-I, MIL STD 810F – 510.4-I and MIL STD 810F – 512.4-I, Protected against blowing rain and dust, Protected against temporary submersion into water (max. depth 1 m) Vibration: MIL-STD-810F, Figure 514.5C-3 Shock: 40g - 6msec; compliance ISO 9022-31-06, No loss of lock to satellite signal when used on a pole set-up and submitted to pole bumps up to 150 mm Drops: Withstands 1.2 m drop onto hard surfaces Topple over: Withstands topple over from a 2m pole onto hard surfaces
Power & Electrical	Supply voltage: Nominal 24 V DC, Range 9.0 – 28 V DC Power consumption: Typically 6 W Internal power supply: 1x recharge & removable LI-Ion battery, 2.6 Ah, 4.4 Ah or 6.0 Ah / 7.4 V, fit into receiver Internal power supply, operation time: • 5:20 h receiving RTK data with standard radio 3) • 4:40 h transmitting RTK data with standard radio 3) • 5:00 h RTK via built-in HSPA connection 3) External power supply: Rechargeable external NiMh battery 9 Ah / 12 V; with voltage peak protection, Fullfils EN13309 Certifications: Compliance to: FCC/IC Class B, CE, EN13309, RCM, ARIB STD-T66, RoHS, WEEE, ACPEIP
MEMORY & DATA RECORDING
Memory	Internal memory: Built-in memory, 466 MB Data capacity: 466 MB is typically sufficient for about GPS & GLONASS (8+4 satellites) 3’100 h raw data logging at 15 s rate
Data recording	Type of data: Onboard recording of RINEX data Recording rate: Up to 20 Hz
INTERFACE
Buttons	• ON / OFF button • 6 function buttons (arrow keys – up/down/left/right, Enter, Esc)
Display	High resolution, 1.8” gray scale display with adjustable backlight: • Provides full receiver status on main screen (position, satellite, radio, modem, battery, Bluetooth®, telematics, memory) • Several submenues for additional details • Various configurations in submenues, e.g. radio channel • Start Base Station with ”Here” or type in coordinate • Start and configure raw data logging
LED status indicator	1 × LED for detailed power status
Additional functionality	BasePilot functionality (stores up to different 100 base station locations and configurations for quick daily start up without user interaction)
COMMUNICATION
Communication ports	1x serial RS232 Lemo, PWR in, 12V PWR out 1x USB Host 1x UART serial & USB (for removable internal RTK devices) 1x TNC for external GNSS Antenna 1x Bluetooth® port, Bluetooth® v2.00+ EDR, class 2
Number of simultaneous data links	Up to 3 real-time output interfaces via independent ports, providing identical or different RTK/RTCM formats
Built In data links	Radio modems: • Optional additional fully integrated, fully sealed receive / transmit radios • User exchangeable device • SATEL M3 TR4: 403 – 470 MHz; up to 1.0 W output power; Pac-crest 4FSK; GMSK & FST; Trimble T & P; Satel 3AS, 8FSK & 16FSK modulation • Intuicom; 902–928 MHz (license free in North America); up to 1.0 W output power Radio modem antenna: External antenna connector (Type QN) 4G LTE / 3G DC-HSPA+ / HSPA+ / HSPA / UMTS (WCDMA): • Built-in cellular modem as default • User exchangeable SIM card • 5-Band LTE: Band 1, 3, 7, 8, 20 • 6-Band DC-HSPA+ / HSPA+ / HSPA / UMTS (WCDMA): Band 1, 2, 3, 4, 5, 8 • Up to 100 mbps downlink speed 4G LTE / 3G HSPA / UMTS / GSM cellular modem antenna: Integrated GSM / UMTS / HSPA / LTE antenna
External data links	Radio modems: • Support of any suitable serial RS232 UHF / VHF radios
Communication protocols	Real-time data formats for data transmission: Leica, Leica 4G, CMR, RTCM 3.1, RTCM 3.2 MSM 3 & 5 Real-time data formats for data reception: Leica, Leica 4G, Leica Lite, CMR, CMR+, RTCM v2.3, RTCM 3.1, RTCM 3.2 MSMx 3 & 5 Web based protocol: NTRIP: receive network corrections; built-in NTRIP Server and Caster to stream local corrections to multiple RTK rovers